How to
A clear start with HUMI.
Watch the concise walkthrough, then keep the setup reference nearby.
Quick-start walkthrough
Watch the complete setup.
Real HUMI photography shows the presentation case, labeled bags, cartridge matching, setting and placement in one concise sequence.
Select play when you are ready.
Watch HUMI in action
Device, cartridges, setup and placement.
Quick setup
One clear setup reference.
Match the labeled cartridges before placing HUMI inside the humidor.
Open the bags
Open the labeled WET and DRY bags.
Match WET / DRY
Match each cartridge to the correct side.
Install
Place both cartridges into HUMI.
Power on + set target
Turn HUMI on and choose the humidity setting.
PLACE HUMI
Place the device inside your humidor.
Independent test
Faster to the target. Closer to it on average.
In the HTD-Services comparison, HUMI reached the 69% humidity target sooner than the tested 60g two-way humidity-control bag and recorded an average humidity closer to that target.
HUMI reached the target 19 days sooner, with a reported average humidity closer to the intended setting.
68.87% RH average
Reaching the target
Day 0
- HUMI
- On the way
- Comparison
- On the way
Curves are illustrative between the documented points: the shared start, the target, and the day each container reached it.
Comparison of HUMI and a 60g two-way humidity-control bag in two plastic cigar containers, with 15 cigars in each and a 69% target. Results describe the tested conditions. Report dated March 29, 2026.
Then, two disturbances
What happened when the air was pushed off course.
After a humidity spike
69%
Set level
87%
Raised
69%
Within 60 min
Both containers returned to 69% within 60 minutes.
Independent third-party comparison under the reported test conditions. Figures are reproduced as stated; full methodology is in the downloadable report.